P0914XB0C FOXBORO福克斯波罗 工控模块备件

产品详情资料

 620、630和MDD841），根据其配置，现在输出默认或保持后状态。在Profibus NIU固件升级期间，根据其配置，输出现在为默认状态或保持后状态。NIU可以清除插槽8中模块产生的故障。Profibus Global Control clear Commands（Profibus全局控制清除命令）将始终将配置为保持后状态或默认为非零值的输出归零。（当Profibus主设备从“运行”模式转换为“清除”模式时，Profibus主机会发送此命令–当PLC CPU从“运行模式”转换为“停止模式”时，PLC主机会发出此命令。）如果在向Profibus主站报告扩展诊断信息的Profibus NIU上执行配置存储或智能I/O模块固件更新，NIU将在配置存储或固件更新完成后报告该信息。故障信息也通过NIU的状态/控制字节报告。Profibus NIU在离开数据交换状态后清除Profibus输出缓冲器。如果在PNIU再次进入数据交换之前将读取输出数据电报（SAP 57）发送给PNIU，则现在返回清除的输出数据。当PNIU正在处理智能I/O模块的固件升级时，配置为默认的输出将转换为其配置的默认值。安装前检查__仔细检查所有装运集装箱是否损坏。如果任何设备损坏，620, 630, and MDD841), outputs now either default or hold last state, according to their configuration. ƒ During a firmware upgrade of the Profibus NIU, outputs now either default or hold last state, according to their configuration. ƒ The NIU can clear faults generated by a module in slot 8. ƒ Profibus Global Control Clear Commands will consistently zero outputs that are configured to Hold Last State or to default to a non-zero value. (Profibus masters send this command when they transition from “Operate” to “Clear” Mode – this occurs in PLC masters when the PLC CPU transitions from “Run” to “Stop” Mode.) ƒ If a configuration store or an intelligent I/O module firmware update is performed on a Profibus NIU that is reporting extended diagnostic information to a Profibus master, the NIU will report the information after the configuration store or firmware update completes. The fault information is also reported via the NIU’s Status/Control Bytes. ƒ The Profibus NIU clears the Profibus output buffer after it leaves the Data Exchange State. If a Read Output Data telegram (SAP 57) is sent to the PNIU before it enters Data Exchange again, the cleared output data is now returned. ƒ Outputs configured to Default will transition to their configured default value when the PNIU is processing a firmware upgrade to an intelligent I/O module. Preinstallation Check __ Carefully inspect all shipping containers for damage. If any equipment is damaged,

发货期：1-3个工作日，具体可联系客服
质保：质保期一年！

主营产品简介
专注于DCS、PLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。

优势：供应进口原装正品，专业停产配件，

发货快，货期精准，

主营品牌包括 ABB贝利、GE/FUANC、FOXBORO、英维思TRICONEX 、本特利BENTLY、A-B罗克韦尔、艾默生EMERSON 、OVATION、MOTOROLA、XYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTH、KUKA、NI、DEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOG、PROSOFT等品牌。

只卖库存产品;出完需订货!价格以客服说明为准!!订货货期以客服说明为准，有任何疑问请联繁客服! Limited stock, Contact US!

●使用前:

在操作和维护，安装设备之前，请阅读并严格遵守安全相关的信息。

Read and strictly follow safety-related information before operatingmaintainingand installing equipment.

●使用者要求:

必须从事安装，组装或维护设备等相关工控电气机械以及其他相关技术的人员。

Must be engaged in the installation,assembly or maintenance of equipment and other related industriacontroeectrica machinery and other related technica personne.应用范围:

应用于品牌本系列工业以及生产生活自动化设备产品。

Used in the brand of this series of industriaand production automation eauipment products

适用于场景:系统集成，非标定制，产线升级改造，原设备电气替换等等。

Suitable for scenarios:system integration,non-standard customizationproduction line upgrading and transformation,electrical replacement of original equipment,etc.

●操作人员:

应该由本品牌专业培训操作员来安装、操作和维修设备。专业人员具有技术能力强，熟悉安全信息和安全实施:

熟悉设备的安装加工、操作和维护:熟悉处理所有的潜在危险情况。

Equipment should be installed,operated and maintained by trained operators from the brand

●危险情况

警告

.请注意使用人员的人身安全。

●除了产品特性以及功能，还需了解产品的使用寿命环境。

●充分学习产品使用手册，否则非专业人员可能会造成人身危险。

Study the product instruction manual thoroughlyotherwise it may cause personal danger to non-professionals.

●服务行业

适用水泥，木业，石业，橡胶，石油，化工，发电，环保，水处理，制冷，交通，钢铁，食品，饮料，船舶，制冷等行业

Applicable to cementwood,stone,rubber,petroleumchemical, power generation,